R8 Bradley EXO | Attachment | 6-Post

R8 Bradley EXO | Attachment | 6-Post

• Modular EXO cable system with 49 angle combinations for total training freedom
• Attachment for existing R8 power racks – expand your setup with no modifications
• Available for three crossbar depths: 42 cm, 78 cm and 108 cm
• Choose from three cable systems: 95 kg, 125 kg or plate-loaded
• For 6-post racks in positions 4 to 6 – the weight stacks mount in the rear extension

Two EXO Arms. 49 angles. No limits.

• Horizontal adjustment: 180° across 7 positions; vertical adjustment: 90° across 7 positions
• 49 angle combinations per side
• Ideal for cable flys, rows, lat pulldowns, face pulls, curls, triceps pushdowns and functional training
• Turns a fixed pulley point into a fully adjustable cable crossover

The cable follows your movement – not the other way around.

• 360° swivel cable outlet keeps the cable tracking cleanly in your line of pull
• No binding, no rubbing against the frame
• Smooth, even resistance and a natural feel through the entire range of motion

Three cable systems. Your call.

• 2×95 kg weight stacks – long cable travel for wide-ranging core work and big movement arcs, with a magnetic pin for lightning-fast weight changes
• 2×125 kg weight stacks – heavy cable training even with the 2:1 ratio
• Plate-loaded – load it with your own weight plates, no cap set by a fixed weight stack
• Side-mounted weight stacks for maximum freedom of movement and added rack stability

Weight in the back. Freedom up front.

• The entire cable system, weight stacks included, sits in the rear extension of your 6-post rack
• The front of the rack stays clear – full freedom of movement for squats, bench press and rack work
• Leaves room up front for more attachments or a retrofit Smith machine

Rock-solid on the rack. Easy to move when you adjust.

• The trolley rides the upright with zero play – no wobble, no rattle, no give
• Under load, the arm locks in along the line of force
• Tool-free adjustment, with UHMW plates protecting the rack finish
• Designed for 75 × 75 mm uprights

2:1 ratio. Controlled. Easy on the joints.

• Even resistance, smaller weight increments and clean technique, even on heavy sets

The upgrade your gym deserves.

• Compatible with R8 attachments such as the step-up platform, hip thrust pad, Leg Blocker and dip station
• Use both cable sides at once with the optional dual pull bar
• On 6-post racks, compatible with the retrofit Smith machine attachment – with the cable system in the back, there's room for the Smith machine up front, and vice versa
• TÜV and GS certified to EN 20957 – suitable for commercial gyms

Which position is right for you?
It comes down to three things: your weight system, the crossbar length of the front section of your rack and the depth of your rear extension.

Step 1 – Which rear extension do you have?
The depth of your rear extension determines which positions are available:

• 42 cm extension → position 4 only
• 78 cm extension → position 4 (front) or position 5 (rear)
• 108 cm extension → position 4 (front), position 5 (middle) or position 6 (rear)

Step 2 – Where is each position?
Looked at the other way around:

• Position 4 → 42 cm extension (the only position), or the very front of a 78 cm or 108 cm extension
• Position 5 → rear of a 78 cm extension or middle of a 108 cm extension
• Position 6 → rear of a 108 cm extension

Step 3 – Pick your cable system, crossbar and position in the configurator.
The crossbar option (42 cm, 78 cm or 108 cm) refers to the depth of the front section of your rack – not the rear extension.

Some crossbar and position combinations share a variant because the cable and hardware are identical. Choose your combination and you'll land on the right product automatically. The cable that matches your position is included.

Have a 4-post rack? Then the R8 Bradley EXO | Attachment (positions 1–3) is the right product for you.