R8 Bradley EXO | Attachment

R8 Bradley EXO | Attachment

• Modular EXO cable system with 49 angle combinations for total training freedom
• Attachment for existing R8 power racks – expand your setup with no modifications
• Available for three crossbar depths: 42 cm, 78 cm and 108 cm
• Choose from three cable systems: 95 kg, 125 kg or plate-loaded
• For 4-post racks in positions 1 to 3

Two EXO Arms. 49 angles. No limits.

• Horizontal adjustment: 180° across 7 positions; vertical adjustment: 90° across 7 positions
• 49 angle combinations per side
• Ideal for cable flys, rows, lat pulldowns, face pulls, curls, triceps pushdowns and functional training
• Turns a fixed pulley point into a fully adjustable cable crossover

The cable follows your movement – not the other way around.

• 360° swivel cable outlet keeps the cable tracking cleanly in your line of pull
• No binding, no rubbing against the frame
• Smooth, even resistance and a natural feel through the entire range of motion

Three cable systems. Your call.

• 2×95 kg weight stacks – long cable travel for wide-ranging core work and big movement arcs, with a magnetic pin for lightning-fast weight changes
• 2×125 kg weight stacks – heavy cable training even with the 2:1 ratio, also with a magnetic pin so you can progress without breaks for changeovers
• Plate-loaded – load it with your own weight plates, no cap set by a fixed weight stack
• Side-mounted weight stacks for maximum freedom of movement and added rack stability

Rock-solid on the rack. Easy to move when you adjust.

• The trolley rides the upright with zero play – no wobble, no rattle, no give
• Under load, the arm locks in along the line of force
• Tool-free adjustment, with UHMW plates protecting the rack finish
• Designed for 75 × 75 mm uprights

2:1 ratio. Controlled. Easy on the joints.

• Even resistance, smaller weight increments and clean technique, even on heavy sets

The upgrade your gym deserves.

• Compatible with R8 attachments such as the step-up platform, hip thrust pad, Leg Blocker and dip station
• Use both cable sides at once with the optional dual pull bar
• On 78 cm and 108 cm racks, compatible with the retrofit Smith machine attachment
• TÜV and GS certified to EN 20957 – suitable for commercial gyms

Which position is right for you?
It comes down to two things: your weight system and the crossbar depth of your rack.

Step 1 – How deep is your rack?
Your crossbar depth determines which positions are available:

• 42 cm rack → position 1 only
• 78 cm rack → position 1 (front) or position 2 (rear)
• 108 cm rack → position 1 (front), position 2 (middle) or position 3 (rear)

Step 2 – Where is each position?
Looked at the other way around:

• Position 1 → 42 cm rack (the only position), or the very front of a 78 cm or 108 cm rack
• Position 2 → rear of a 78 cm rack or middle of a 108 cm rack
• Position 3 → rear of a 108 cm rack

Step 3 – Pick your cable system, crossbar and position in the configurator.
Choose your combination and you'll land on the right product automatically. The cable that matches your position is included.

Have a 6-post rack with a rear extension? Then the R8 Bradley EXO | Attachment | 6-Post (positions 4–6) is the right product for you.